Differences

This shows you the differences between two versions of the page.

--- commands:aflim [2025/03/31 17:28] – swap banner orders brandon
+++ commands:aflim [2026/08/31 17:36] (current) – tag order brandon
@@ Line 6: / Line 6: @@
 ^Shortcut |AL|
-^Format  |AL [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
+^Format  |AFLIM [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
 ^Remembered |Using SS Z |
@@ Line 14: / Line 14: @@
 ^Shortcut |AL|
-^Format  |[Addr#]AL [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
+^Format  |[Addr#]AFLIM [X=Log_amp_AGC] [Y=LED_intesity_pot] [Z=in_focus_mm]   |
 ^Type |Card-Addressed|
 ^Remembered |Using [Addr#]SS Z |
@@ Line 20: / Line 20: @@
 <--
-**X/Y:** The X and Y arguments of this command to directly read and write values (0 to 255) to the CRISP electronics digital potentiometers.  (Not recommended for use with host software.)
+**X/Y:** The X and Y arguments of this command to directly read and write values (0 to 255) to the CRISP electronics digital potentiometers.  <wrap info>Not recommended for use with host software.</wrap>
+  * See the [[:commands:lock|LK M]] command to adjust the LogAmp_AGC instead of ''AL X''.
+  * See the [[:commands:unlock|UL X]] command to adjust the LED intensity instead of ''AL Y''.
+\\
 **Z** ''[in_focus_mm]'': The Z-argument specifies the focus precision (in millimeters) when the lock state changes from K or k to F. Useful for automatic checking of desired focus stability.  Also useful to enforce a tighter or looser focus state before indicating a lock condition.  Note that this value is overwritten whenever the NA of the objective is specified via the LR Y command as of November 2015.
@@ Line 31: / Line 34: @@
 ^Shortcut |AL|
-^Format  |AL [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
+^Format  |AFLIM [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
 ^Remembered |Using SS Z |
@@ Line 39: / Line 42: @@
 ^Shortcut |AL|
-^Format  |[Addr#]AL [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
+^Format  |[Addr#]AFLIM [X= x-axis highlight] [Y= y-axis highlight] [Z= safety limit enable]  |
 ^Type |Card-Addressed|
 ^Remembered |Using [Addr#]SS Z |
@@ Line 50: / Line 53: @@
 <WRAP center round important 60%>
-Caution:  Disabling the safety limit could result in damage to your optics, your sample, or your focus drive.
+**Warning!** Disabling the safety limit could result in damage to your optics, your sample, or your focus drive.
 </WRAP>
@@ Line 73: / Line 76: @@
-{{tag>commands tiger ms2000 crisp autofocus}}
+{{tag>crisp autofocus commands tiger ms2000}}

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181