Differences

This shows you the differences between two versions of the page.

--- commands:stopbits [2018/02/07 17:28] – jon
+++ commands:stopbits [2025/05/21 20:05] (current) – brandon
@@ Line 1: / Line 1: @@
+====== Command:STOPBITS (SB) ======
+^Shortcut  |SB|
+^Format  |STOPBITS [X?] [X=n] |
+^Units    |Integer [1 or 2] |
+^Remembered |Using SS Z |
+**N:** Sets the number of stop bits, n, to be used for RS-232 serial communication. The default is one ''1'' stop bit; the other option is two ''2'' stop bits. Use the [[commands:saveset|SAVESET Z]] command to retain the new stop bit setting after power off.
+<WRAP center round info 60%>This command is only available on the MS-2000.</WRAP>
+{{tag>commands ms2000}}

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181