Differences

This shows you the differences between two versions of the page.

--- commands:stopbits [2021/09/23 17:16] – external edit 127.0.0.1
+++ commands:stopbits [2025/05/21 20:05] (current) – brandon
@@ Line 2: / Line 2: @@
 ^Shortcut  |SB|
-^Format  |STOPBITS X=n \\ STOPBITS X? |
+^Format  |STOPBITS [X?] [X=n] |
-^Units    |integer, 1 or 2|
+^Units    |Integer [1 or 2] |
 ^Remembered |Using SS Z |
-Sets the number of stop bits, n, to be used for RS232 serial communication.  The default is one ''1'' stop bit; the other option is two ''2'' stop bits.  Use the [[commands:saveset|SAVESET Z command]] to retain the new stop bit setting after power off.
+**N:** Sets the number of stop bits, n, to be used for RS-232 serial communication. The default is one ''1'' stop bit; the other option is two ''2'' stop bits. Use the [[commands:saveset|SAVESET Z]] command to retain the new stop bit setting after power off.
+<WRAP center round info 60%>This command is only available on the MS-2000.</WRAP>
 {{tag>commands ms2000}}

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181