Differences

This shows you the differences between two versions of the page.

--- commands:stopbits [2025/05/21 20:05] – brandon
+++ commands:stopbits [2025/05/21 20:05] (current) – brandon
@@ Line 6: / Line 6: @@
 ^Remembered |Using SS Z |
-**N:** Sets the number of stop bits, n, to be used for RS-232 serial communication. The default is one ''1'' stop bit; the other option is two ''2'' stop bits. Use the [[commands:saveset|SAVESET Z command]] to retain the new stop bit setting after power off.
+**N:** Sets the number of stop bits, n, to be used for RS-232 serial communication. The default is one ''1'' stop bit; the other option is two ''2'' stop bits. Use the [[commands:saveset|SAVESET Z]] command to retain the new stop bit setting after power off.
 <WRAP center round info 60%>This command is only available on the MS-2000.</WRAP>
 {{tag>commands ms2000}}

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181