Differences

This shows you the differences between two versions of the page.

--- piezo_manual [2023/04/02 04:33] – edit title brandon
+++ piezo_manual [2026/08/31 16:33] (current) – [Disabling Strain Gauge Calibration on Startup] fix link brandon
@@ Line 64: / Line 64: @@
  By Default every time a piezo controller is turned on, it checks the Strain Gauge Offset(by running the same test PZINFO does to determine if the Strain Gauge offset is "OK" or "BAD"). If necessary, it performs the auto calibration routine. **Changes in the sample weight, room temperature and piezo age require strain gauge calibration.**
-If the user would like to disable this feature, issue the serial command [[commands:customa#z_o|CCA Z=15]] followed by [[commands:saveset|SS Z]].
+If the user would like to disable this feature, issue the serial command [[commands:customa#z_parameter|CCA Z=15]] followed by [[commands:saveset|SS Z]].
 ===== Fast Slow Mode =====
@@ Line 91: / Line 91: @@
 |Piezo Travel Range (+- 5%)						|150 um	|300 um	|500 um|
 |Piezo smallest move/resolution †				|2.2 nm	|4.5 nm	|7.6 nm|
-|Maximum Load for full range travel in Kilogram	|1 Kg	|||
+|Maximum Load for full range travel	|1 Kg	|||
 |Modes Capable									|Fast and Slow Mode	|Slow mode only	||
 |External Analog  input(BNC)					|0 to 10 Volts |||

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181