Differences

This shows you the differences between two versions of the page.

--- tiger_phototargeting [2021/03/08 17:00] – brandon
+++ tiger_phototargeting [2021/03/08 17:23] (current) – brandon
@@ Line 12: / Line 12: @@
 Triggering the ring buffer can be controlled using the TTL input as usual (not yet tested)
-We adapt the [[commands:aij|AIJ command]] originally from the ARRAY firmware module for the ''MM_TARGET'' module.  Thus these two firmware modules are mutually exclusive and should used together.  The same axis property bit (Bit3) is set high when the ''MM_TARGET'' module is present as when the ''ARRAY'' module is present. (It is a safe assumption for the foreseeable future that the ''ARRAY'' firmware will not be used on a micro-mirror card, so if Bit3 of the axis property is set and the axis type code is ‘u’ then the ''MM_TARGET'' module is present.)
+We adapt the [[commands:aij|AIJ command]] originally from the ARRAY firmware module for the ''MM_TARGET'' module.  Thus these two firmware modules are mutually exclusive and should not be used together.  The same axis property bit (Bit3) is set high when the ''MM_TARGET'' module is present as when the ''ARRAY'' module is present. (It is a safe assumption for the foreseeable future that the ''ARRAY'' firmware will not be used on a micro-mirror card, so if Bit3 of the axis property is set and the axis type code is ‘u’ then the ''MM_TARGET'' module is present.)
 ===== TG-1000 Command Set for Phototargeting with Micro-mirror cards =====

Address: 29391 W Enid Rd. Eugene, OR 97402, USA | Phone: +1 (541) 461-8181